Optoma Technology Projector Accessories GT750 User Manual

Pairing Mode – Optoma 3D-RF System: Optoma 3D-RF Glasses and Optoma 3D-RF  
Emitter for Optoma 3D-XL Converter Box and 3D ready projector models HD83, HD33,  
GT750.  
Contains Patent Pending software and technology from Bit Cauldron  
Contient les logitiels de brevet en instance et la technologie de la compagnie Bit Cauldron  
Connections  
Optoma 3D-XL converter box with 3D Emitter Port  
Connect the Optoma 3D-RF emitter to the Optoma 3D-XL converter box using the IR Emitter Port as shown below.  
LED Indicators  
After cable connection the LEDs will display a red moving pattern while the emitter is attempting to acquire a 3D signal and until a  
3D sync signal is found. The joystick of Optoma 3D-RF Emitter can be moved in any direction to enable pairing mode. If any  
Green LEDs are on, push the joystick in any direction for a second until all LEDs are off. Then push the joystick in any direction for  
3 seconds until 3 green LEDs turn ON. Release the joystick when 3 green LEDs turn ON. You can always remove the cable and  
start over if you end up in wrong move.  
Copyright 2011 Bit Cauldron Corporation  
Page 1 of 2  
 

Miele Clothes Dryer T 4162 User Manual
Milan Technology Switch MIL S24002TGXX User Manual
National Instruments Switch NI 6115 User Manual
NEC Server 320Fd Systems User Manual
Nintendo Automobile Accessories APS 996a User Manual
Omnimount TV Mount OM10049 User Manual
Onkyo Home Theater System PR SC5507 User Manual
Oreck Vacuum Cleaner Pro 12 User Manual
Panasonic Network Card 2SA2161J User Manual
Panasonic Smoke Alarm 1826 User Manual